A few days ago the images and basic details for Realme 10 and 10 Pro + were published by agencies in China. Now TENAA has updated its list with the full spec sheet for both models, so let’s dive deeper.
The Realme 10 5G (RMX3663) has a 6.7 ”LCD with 1,080 x 2,400 px resolution (refresh rate is not listed). The phone itself measures 163.7 x 74.2 x 8.1mm and weighs 190g.
It is powered by an unnamed chipset with 6, 8, or 12GB of RAM and 64, 128, 256, or 512GB of storage. Like its predecessor, the Realme 10 is expected to have both 4G and 5G versions, this is the 5G model (the 4G one is powered by the Helio G99, but the TENAA doesn’t have that model yet).
Realme 10 5G (photo TENAA)
The camera setup looks simple enough: a 108MP main camera (rumors say it has OIS, TENAA doesn’t say) and a 2MP assistant, plus a 16MP selfie camera.
Inside is a 4,870mAh (typical capacity) battery that will support 33W fast charging, according to the 3C. Note that the nominal battery capacity will actually be 5,000mAh to match the Realme 9.
Turning to Realme 10 Pro + (RMX3687), it also has a 6.7-inch display (1,080 x 2,412 px resolution), but upgrade to a curved, 10-bit AMOLED panel judging by color depth. The phone is also a bit thinner at 161.5 x 73.9 x 7.8mm and lighter at 172.5g.
That doesn’t mean a smaller battery, however, the typical capacity is slightly above 4,890mAh – this should also be listed as 5,000mAh. This will feature faster 67W charging (beating Realme 9 Pro + ‘s 4,500mAh / 60W configuration).
Realme 10 Pro + (photo by TENAA)
The new Pro + model is expected to feature the Dimensity 1080 chipset (an updated version of the Dimensity 920 inside the older Pro +). It will be paired with 6, 8, or 12GB of RAM and 64, 128, 256, or 512GB of storage.
As for the cameras, this also has a 108MP main module (with OIS, presumably) and adds an 8MP ultra wide (keeping the 2MP helper). At the front is a 16MP selfie camera.
Both Realme 10 5G and Realme 10 Pro + are expected to debut with Realme OS 3.0. When this could happen is not yet clear.
Start a new Thread