Increasing the speed of your electric scooter is possible and simple. A guide consisting of a few steps explains everything: the details of the procedure.
In the last period, the electric scooter has certainly been one of the most purchased products ever. Many headed to choosing a Ninebot and precisely this brand allows you to Increase speed by following a simple guide.
Anyone who has purchased an electric scooter with the license plate Ninebot ES1, ES2 or ES4 will be able to rely on some indications that will allow to have a higher speed than the preset one. With this guide in fact, it will be possible to have an increase in speed of about 30%, bringing the scooter up to 35 km/h.
Before going into the details of the guide, it is right to specify two points: the first is that putting the indications into practice is very simple, while the second is that, in Italy, Electric scooters that go over 25km/h are considered illegal. Reason why, the responsibility for the decision you are going to take is yours alone given that, as with any other vehicle, you must not exceed the speed limit.
Increase the speed of the electric scooter: here are the steps
Electric mobility certainly represents the future and the electric scooter with its sharing activity is one of the most popular solutions. As we know, this medium can be connected to the smartphone and is equipped with a firmware which serves for update the system And check the speed. With a firmware version below 1.5.1 you can proceed with the guide otherwise this won’t work.
Once the version is certified, the next step will be to download And install the modified firmware which will allow the scooter to reach a higher speed.
Download the reference firmware
After viewing the system version of our scooter, all we have to do is download the modified file for the Ninebot. Once downloaded we should not unpack it but only save it on our mobile device in the download section.
Install firmware
To install the firmware you will need to have a dedicated app called ESDownG that is possible download for free from play store. This application exists only for Android which is why the smartphone will have to mount that operating system.
After downloading and installing, all you have to do is follow these steps:
- Turn on the Ninebot;
- Activate the Bluetooth of the device and close the official Ninebot app it doesn’t have to be in the background either;
- Open the ESDownG app and select the “connect” And pair it to our scooter;
- Select Open Bin and choose the ZIP file previously downloaded and then click on Ninebot;
- Wait for about 5 minutes for the completion of the procedure being careful not to switch off the two devices. In fact, if it is switched off, the vehicle will no longer move;
- At the end of the process it will only be necessary to restart the scooter.
Start a new Thread